What is Demolition Contractors Singapore?

Demolition Contractors Singapore delivers expert hacking and clearance services, with 17 pages for projects, leads, enquiries, and renovation needs today.

Can you hack walls in HDB flats?

Yes. We are an HDB-licensed contractor (HB-06-2556H) and we handle the full renovation permit submission on your behalf. All hacking in HDB flats is carried out within permitted hours — 9:00 AM to 5:00 PM on weekdays only, with no works on Saturdays, Sundays and public holidays.

How do I know if my wall is load-bearing?

Load-bearing walls typically appear as thick solid lines on your floor plan, and they often run perpendicular to the floor joists or sit directly above a similar wall on the floor below. The only reliable way to confirm is to review your structural drawings — we do this for you before any hacking begins, and where there is any doubt we refer to a Professional Engineer.

How much does wall hacking cost in Singapore?

The cost depends on the wall's length, thickness and material (brick, drywall or concrete), the volume of debris to dispose of, and whether the wall sits in an HDB flat, condo or landed home. We provide a transparent, itemised quotation after a site assessment or review of your photos — usually within 24 hours — with no hidden charges.

How long does wall hacking take?

A single non-load-bearing partition wall is typically a half-day to one full day, including setup, protection, hacking and debris clearance. Multiple walls or a full-unit layout reconfiguration usually runs two to three days. We give you a fixed schedule at the site assessment so your renovation contractor can plan around it.

Will there be a lot of dust?

Wall hacking is inherently dusty, but we control it. We seal the work zone with heavy-duty canvas sheeting, use dust-extraction vacuums on our power tools, and work section by section rather than demolishing in one uncontrolled pass. Dust is contained within the unit as much as possible, and we sweep and clean the area before we leave.

How do you protect my flooring and surrounding finishes?

Before any hacking begins, we lay protective sheeting over all flooring, mask off door frames and built-ins, and erect plywood barriers around the work zone. Fixtures and finishes that are staying — tiles, cabinetry, glass — are protected from debris and vibration throughout the job.

Do you remove all the debris?

Yes. Every wall hacking quote includes bagging, haulage and NEA-licensed disposal of all demolition waste. Nothing is left in your unit or the common corridor — we bag everything, sweep the lift lobby and corridor, and dispose of all waste at approved NEA facilities.

Can you coordinate with my renovation contractor or interior designer?

Absolutely. We work alongside renovation contractors and interior designers all the time. We confirm the scope, agree the timeline, hand over a clean surface ready for the next trade, and coordinate with your MCST or condo management on access and debris chute timing so your renovation stays on schedule.

Do you handle the HDB renovation permit?

Yes. As an HDB-registered contractor (HB-06-2556H) we prepare and submit the renovation permit on your behalf, including the hacking scope and method. You do not need to deal with HDB directly — we handle the paperwork and ensure the works comply with all renovation guidelines.

Wall Hacking Singapore

Wall Hacking Services in Singapore for Renovation Projects

Name: Demolition Contractor Singapore
Address: 20 Woodlands Link #04-06, Singapore, Woodlands, 738733, SG
Telephone: +65 9100 9330
Price range: $$

BCA-Registered · HDB-Licensed (HB-06-2556H) · NEA-Licensed

Open up your home with professional wall hacking and non-load-bearing wall removal. We protect your property, control the dust, clear every piece of debris, and hand back a clean, renovation-ready space — whether you are a homeowner reimagining your layout, a designer delivering open-concept living, or a contractor subcontracting the demolition scope.

Get a quote View Completed Wall Hacking Projects

Why Homeowners Remove Walls

Open kitchens, combined living and dining areas, brighter corridors, reconfigured bedrooms — wall hacking is how you make an older flat work for the way you live today. But every wall in a Singapore high-rise sits in a shared structure, so planning comes first. We review your floor plan, confirm which walls are non-load-bearing, and map out exactly what can safely come out.

What We Can Safely Hack

Non-load-bearing partitions only — brick walls in older HDB resale flats, drywall and stud partitions in newer BTOs and condos, half walls, kitchen walls, bedroom walls, and store room walls. We also cut clean openings for new doorways or pass-through windows. Load-bearing walls, columns and beams are never touched without a Professional Engineer's sign-off.

Our Wall Hacking Process

Review your floor plan and confirm the wall is non-load-bearing. Assess on site for embedded conduits and plumbing. Provide a transparent, itemised quote. Protect your flooring and finishes with canvas sheeting and plywood barriers. Hack section by section with dust-extraction tools. Bag and haul all debris to NEA-licensed facilities, grind edges flat, and hand over a clean, ready-to-build surface.

Experience Across Every Property Type

HDB flats and BTOs (permit handling, permitted hours), resale flats (older brick partitions), condos (MCST coordination), landed homes (PE-signed structural alterations), and commercial units (selective demolition around live services). We have hacked walls in all of them.

Safety, Dust Control & Site Protection

We seal the work zone with canvas sheeting and plywood barriers, use dust-extraction vacuums, and work section by section. All hacking stays within permitted hours — 9:00 AM to 5:00 PM, weekdays only. After the wall is down, we grind edges flat, bag every piece of debris, and sweep corridors and lift lobbies clean.

Why Choose a BCA-Registered, HDB-Licensed Contractor

The wrong contractor can cost you structural damage, neighbour complaints, MCST fines, or an HDB stop-work order. We are BCA-registered and HDB-licensed (HB-06-2556H), review structural drawings before we start, protect your property, quote transparently, and hand over on schedule.

What's Included

Everything handled, end to end.

Direct contractor — no ID or main-con markup.

Floor plan and structural drawing review to identify non-load-bearing walls
HDB renovation permit application and full submission (HB-06-2556H)
Complete site protection — canvas sheeting, plywood barriers and dust containment
Safe, controlled demolition of non-load-bearing brick, partition and drywall walls
Protection of surrounding flooring, fixtures, doors and completed finishes
Clean openings cut for new doorways, windows or service penetrations
Post-hacking surface grinding and edge preparation for your builder
Debris bagging, haulage and NEA-licensed disposal — included, no separate charge
Daily cleanup of lift lobbies, corridors and all common areas
Coordination with MCST, condo management and your renovation contractor
Clear project timeline and on-schedule handover for your renovation

Questions

Straight answers before you commit.

No jargon, no pressure. If your question isn't here, message us on WhatsApp.

No. Only non-load-bearing partition walls can be safely removed. Load-bearing walls, structural columns and beams must stay — removing them would compromise the building's integrity. We review your floor plan and structural drawings before any work begins to confirm exactly which walls are safe to hack.

Free Site Assessment

Ready to Open Up Your Space?

Send us your floor plan or a few photos of the wall on WhatsApp. We will confirm whether it is safe to hack, scope the works, and give you a transparent, itemised quote — usually within 24 hours. No hidden costs, no ID markups, no guesswork.

Get a quote +65 9100 9330 Get a quote